DTF Transfers By Size

Please upload your files in PNG format with a transparent background and a resolution of 300 DPI or higher.

If you need help removing the background, you can use our Gang Sheet Builder. Simply right-click on the images you upload, and you’ll be able to easily remove the background. This ensures your files are ready for printing or digital use.

Heat Press Settings

No universal setting works for all heat presses—find the right balance for your machine.

• Start with 325–350°F for 8–10 seconds.
  
• Always apply the highest possible pressure.
  
• Test and adjust until you discover the ideal settings for consistent results.
  

Preparation & Printing

• Place the design on the garment in the desired position.
  
• Smooth out any wrinkles on the fabric.
  
• Set the correct heat and time based on garment type.
  
• Press the transfer accordingly.
  

Hot Peel Instructions

• Peel the film immediately while hot.
  
• Pull the film sideways, not upwards.
  
• Ensure the design fully adheres to the fabric.
  
• If needed, reapply heat and pressure for better adhesion.
  

Second Press

• Cover the design with parchment paper, kraft paper, or a Teflon sheet.
  
• Press again with heat for extra durability.
  

Final Washing Care

• Turn the garment inside out before washing.
  
• Wash in cold water.
  
• Air dry or tumble dry on low heat.

Polyester

• Temperature: 300–320°F (149–160°C)
  
• Time: 6–8 seconds
  
• Pressure: Medium-high (enough to adhere without crushing the fabric)
  
• Peel Type: Hot peel or warm peel (some polyesters may need a few seconds to cool before peeling)
  
• Note: Excessive heat can melt polyester or damage the transfer.
  

Cotton-Polyester Blends (50/50, 65/35, etc.)

• Temperature: 310–330°F (155–166°C)
  
• Time: 7–9 seconds
  
• Pressure: Medium-high
  
• Peel Type: Hot peel (if the film doesn’t fully adhere, wait a few seconds and press lightly again)